Flexible waterproof LED insert for figures and lamps, designed to be mounted in a 10mm hole and secured by tightening the bolt. The rubber blind nut makes installation incredibly easy, making it useful in hard-to-reach places. The blind nut expands and locks in the hole, and the assembly is therefore also waterproof.
It is specifically designed for small Michelin men, as the included bracket can also be used to secure the figure. However, it can easily be used in other places, such as position lights.
Mounting
You must seal the thread and the hole in the nut yourself. We recommend flexible sealant so it can be disassembled again. The thread in the emitter should also be secured to the bolt.
The entire insert can be easily disassembled, and the bracket can be removed.
Drill a 10mm hole, and insert the emitter. Fasten the nut on the backside, until the emitter is secure.
Do not overtighten the rubber cap nut. If it breaks, it can easily be replaced.
Do not overtighten the rubber cap nut. If it breaks, it can easily be replaced.
Facts for 24V, Dual Color Amber / Xenon white
| LEDs: | 6 x 2835 medium power |
| Power: | 0,72W |
| Voltage: | 24-30V |
Facts for 12V, Dual Color Amber / Xenon white
| LEDs: | 6 x 2835 medium power |
| Power: | 0,72W |
Flexible waterproof LED for figures and lamps. Designed for small Michelin figures. Mounted easily and quickly in a 10mm hole
Vis fuld beskrivelse
