Compact 24V LED light source that replaces the original H1 halogen bulb in the AEB 590 / 595 rotating beacons. The light source is dual color, but you do not have to use the color switching, and you can decide it just lights one color.
Available for either 12V or 24V
Each light source contains 42 powerful LEDs. 21 LEDs of each color. The emutter of course works best in a transparent glass.
Mounting
The installation is quite simple. Unscrew the glass from the base.
- Loosen the nut holding the bulb in place and remove the original H1 bulb. Cut the wire that goes up through the base.
- Install the light source and secure it with the nut.
- Remove the top part by removing the 3 larger screws.
- Pair the colored wires in the lamp housing.
The easiest way is to connect them to the input wire. However, the rotor beacon will operate in reverse polarity if reversed. Alternatively, the bulb's wires may be led out separately.
Color Change
Color change can be achieved with a switch, a two-pole relay, or one of our Dual Color Controllers. You can also just decide, that it only needs to light up in one color.
The simplest solution is the Dual Color switcher, which changes color upon receiving a signal.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
The light source is not ECE-approved. It is sold individually.
Facts for 24V, Dual Color Yellow / Blue
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 24V, Dual Color Yellow / Red
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 24V, Dual Color Yellow / Green
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 24V, Dual Color Yellow / Cold White
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 12V, Dual Color Yellow / Blue
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 12V, Dual Color Yellow / Red
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 12V, Dual Color Yellow / Green
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 12V, Dual Color Yellow / Cold White
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Facts for 12V, Dual Color Cold White / Red
| Color change: | Polarity flip |
| Effect: | 5W |
| LEDs: | 21 + 21 |
Compact LED dual color light source fitting the AEB halogen rotating beacon. Replaces the H1 bulb.
Vis fuld beskrivelse
