Elegant square multifunction LED taillamp with dynamic indicator-light. Available in 4 different models with 5 or 6 functions respectively. The LED taillamps are available with or without lincenseplate-light, and you can choose between fog- or reverse-light.
The built-in voltage regulator allows you to connect it to both 12V and 24V, that gives you a lot of possibilities.
The lamp is (EMC); R10-approved for legal road use.
The lamp is completely waterproof (IP67)
The special thing about this model is that it equipped with dynamic indicator-light in LED, that can be found on modern carmodels. On the lamp there is a 1 meter long wire in black
- WHITE: GROUND/ -
- BLACK: DRIVING-LIGHT / DRIVING-LIGH + LICENSEPLATE-LIGHT
- BLUE: REVERSE-LIGHT / FOG-LIGHT
- RØD: BREAK-LIGHT
- GUL: INDICATOR-LIGHT
Essembly:
The lamp is easily mounted using the two built-in bolts on the back of the lamp and supplied nuts.
Ref.: 5907556014169, 5907556014183, 5907556014206, 5907556014220
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Facts for 5 Functions, Reverse-light
| Consumtion, Break-light: | 12V/24V = 1,5W/3W |
| Consumtion, Fog-light: | 12V/24V = 2W/4W |
| Consumtion, Indicator: | 12V/24V = 4,5W/9W |
| Forbrug, Driving- and licenseplate-light: | 12V/24V = 1,5W/3W |
| Forbrug, Reverse-light: | 12V/24V = 2,8W/5,5W |
| Voltage: | 12-36V DC |
| Work temperature: | – 40°C to +55°C |
Fristom Multifunction LED baglygte with dynamic indicator, available in 4 different models with 5 or 6 functions respectively.
Vis fuld beskrivelse
