LED Lighting
LED Stripes, Splashproof, 5m - 12V
Do you want cables on your LED strip?
If you want cables on the Strip, you should use our Strip-guide, where you can choose between cable types and length.
Go to the LED Strip-guide
The splashproof LED Tape SMD can be shortened or extended further, so it fits for your project. The stripe is 8/10 mm wide and is built up in small modules of 5 cm or 10 cm, where there are 3-6 heavy SMD diodes in a circuit ready for 12Vdc. There are clear markers where the stripe can be cut, as well as solder-islands, where you can solder wire on or extend with more SMD-tape. On the back is a 3 m powerful tape, which makes that LED SMD tape to stay attached to his seat without screws.
It is sold in coils of 5 metres, but you can short it up/prolong it, so that it fits for the task. They should not be used in particularly exposed areas with water (for example aquarium lighting), as the product is only splashproof.
The solid color SMD LED stripe can be connected directly to 12Vdc or to a 12Vdc transformer, which can be purchased from us as well. The LED stripe can also be attenuated in the brightness via our 12Vdc dimmers, which are mounted between the tape and the transformer.
The installation is very simple, but it must be used in houses/buildings and according to the law - should be mounted by an electrician.
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
This stripe should be mounted on a metal surface or in a aluminum profile
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
This stripe should be mounted on a metal surface or in a aluminum profile
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
This stripe should be mounted on a metal surface or in a aluminum profile
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
This stripe should be mounted on a metal surface or in a aluminum profile
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
This stripe should be mounted on a metal surface or in a aluminum profile
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
This stripe should be mounted on a metal surface or in a aluminum profile
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
This stripe should be mounted on a metal surface or in a aluminum profile
We do not recommend that you join LED strips in lengths over 5 meter, as the brightness will be different from end to end. You can choose to connect power in the middle of a 10 meter strip.
The color of the strip can vary from order to order
Facts for Cool white, 360 Lumens
| Bandwidth: | 8 mm |
| Color: | Cool White ~ 6500 k |
| Colour Rendering (Ra): | 75 |
| Consumption per coil: | 21,0 Watt ~ 1750mA |
| Consumption per metre: | 4.2 Watts ~ 350mA |
| Density: | IP54 |
| Diodes per meter: | 60stk |
| LED Type: | 1210 SMD |
| Light output per 100 cm: | 360 Lumen |
| Light Scattering: | 120 ~ 140 degrees |
| Tracking: | 5 cm |
| Voltage: | 12Vdc |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 5.0 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 4.2 Watt |
| Watt per spool (5m) | 21.0 Watt |
| Lumens / meter | 350 Lumen |
| LEDs / meter | 60 |
| Color temperatur | 3200 Kelvin |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 2.5 cm |
| Strip width | 10 mm |
| Height | 4.0 mm |
| Watt / m | 12.0 Watt |
| Watt per spool (5m) | 60.0 Watt |
| Lumens / meter | 1600 Lumen |
| LEDs / meter | 120 |
| Color temperatur | 3000 Kelvin |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 5.0 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 4.2 Watt |
| Watt per spool (5m) | 21.0 Watt |
| Lumens / meter | 360 Lumen |
| LEDs / meter | 60 |
| Color temperatur | 6500 Kelvin |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 5.0 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 4.2 Watt |
| Watt per spool (5m) | 21.0 Watt |
| Lumens / meter | 270 Lumen |
| LEDs / meter | 60 |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 5.0 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 4.2 Watt |
| Watt per spool (5m) | 21.0 Watt |
| Lumens / meter | 80 Lumen |
| LEDs / meter | 60 |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 5.0 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 8.4 Watt |
| Watt per spool (5m) | 42.0 Watt |
| Lumens / meter | 700 Lumen |
| LEDs / meter | 120 |
| Color temperatur | 3200 Kelvin |
| Beam angle | 120 degree |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 3.0 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 8.4 Watt |
| Watt per spool (5m) | 42.0 Watt |
| Lumens / meter | 700 Lumen |
| LEDs / meter | 120 |
| Color temperatur | 6000 Kelvin |
| Beam angle | 120 degree |
| Color Rendering Index (CRI) | 80 |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 2.5 cm |
| Strip width | 10 mm |
| Height | 4.0 mm |
| Watt / m | 12.0 Watt |
| Watt per spool (5m) | 60.0 Watt |
| Lumens / meter | 1600 Lumen |
| LEDs / meter | 120 |
| Color temperatur | 4000 Kelvin |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 2.5 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 8.4 Watt |
| Watt per spool (5m) | 42.0 Watt |
| Lumens / meter | 360 Lumen |
| LEDs / meter | 120 |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 2.5 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 8.4 Watt |
| Watt per spool (5m) | 42.0 Watt |
| Lumens / meter | 680 Lumen |
| LEDs / meter | 120 |
| Beam angle | 120 degree |
IP rating
| Rating: | IP 54 |
| Solid: | 5 - Partially protected against dust |
| Liquid: | 4 - Water splash, all directions |
LED strip data
| Voltage | DC12V |
| Conductors | 2 |
| Division | 2.5 cm |
| Strip width | 8 mm |
| Height | 4.0 mm |
| Watt / m | 8.4 Watt |
| Watt per spool (5m) | 42.0 Watt |
| Lumens / meter | 860 Lumen |
| LEDs / meter | 120 |
| Beam angle | 120 degree |
Relaterede kategorier
Do it yourself Rails/profiles for LED Strips
Pick color
| Warm white | |||
|
|||
|
|
|||
|
|
|||
| Neutral white | |||
|
|
|||
| Cool white | |||
|
|
|||
|
|
|||
| Red | |||
|
|
|||
| Green | |||
|
|
|||
|
|
|||
| Blå | |||
|
|
|||
| Yellow | |||
|
|
|||
| Accessori | |||
|
|
|||
|
|
|||
Retail price: 1,50 DKK
Retail price: 1,50 DKK
