Dual color LED emitter with 12 bright LEDs, that replace the original LED emitter, that only has white light. The default lamp is red and white or RGB, but can be customized to order.
The original ceiling lamp is removed and disassembled easily. Glass and reflector is taken out, and the original emitter removed. The new board is clicked directly in to where the original was.
You can connect the lamp completely seperatly from any other lights, and turn it on with a switch or dimmer. With the dual color, you can also connect the light to the built-in red and white light.
Connecting - Dual color
The original connector-pins are fixed on the original emitter, so instead of a connector you have 3 wires:
- Black: Minus
- White. Plus for white light
- Red: Plus for red light
White and black wire is connected to the original wires, either by buying the adapter, or by cutting off the original connector. The red wire is then connected to plus on the existing red light in the truck. Doing so, the red and white will turn off automatically with the other original lights, and will also be dimmed with it.
Connecting - RGB
This model is connected to a standard RGB controller, where you can choose the color and adjust the brightness. It is controlled exclusively by remote control, and not via the truck's functions. There are 4 wires that are connected to the controller as usual: Red, Green, Blue and white (plus)
You will need 2 pcs. (4 emitters) for one truck.
You must be very careful when reattaching the front panel. Take care not to hit the diodes, as they could get scratched. If this happens, the colour will change to violet instead.
You will need 2 pcs. (4 emitters) for one truck.
You must be very careful when reattaching the front panel. Take care not to hit the diodes, as they could get scratched. If this happens, the colour will change to violet instead.
Pin 1 = Plus (White wire)
Pin 2 = Minus (Black wire)
You will need 2 pcs. (4 emitters) for one truck.
You must be very careful when reattaching the front panel. Take care not to hit the diodes, as they could get scratched. If this happens, the colour will change to violet instead.
Facts for Dual Color, Neutral white / Red
| Color: | Neutral white and Red |
| Consumption: | 4W |
| Functions: | Dimmable, Dual Color |
| LEDs: | 2 x 6 High power LEDs |
| Voltage: | 24V |
Facts for Accessory, Adapter cable
| Color: | Neutral white and Red |
| Consumption: | 4W |
| Functions: | Dimmable, Dual Color |
| LEDs: | 2 x 6 High power LEDs |
| Voltage: | 24V |
Facts for RGB
| Color: | Neutral white and Red |
| Consumption: | 4W |
| Functions: | Dimmable, Dual Color |
| LEDs: | 2 x 6 High power LEDs |
| Voltage: | 24V |
LED emitter with 12 bright LEDs, that replace the original emitter, that only has white light. Available with dual color or RGB.
Vis fuld beskrivelse
