Prostrobe LED lamp with a "halo" marker light all around the edge of the lamp and a bright LED strobe warning light in the middle. The lamp is available with red, white, and yellow marker light, and yellow strobe light in the middle. Other combinations can be supplied if requested.
The strobe and marker light can be controlled individually, and can also be turned on simultaneously. This is a great-looking lamp, and a cheaper solution than the alternative, if you need both a marker light and a warning light. You avoid an extra unit that also needs to be mounted and connected.
The warning light has 21 different patterns, and the lamps can be set up in alternating groups, so that they flash right/left or top/bottom on your vehicle.
The warning light and the marker light are ECE-approved (R65 warning light, R7/R91 position light, R10 EMC, and CE), which allows them to be used on public roads and highways.
Connection
The strobe and warning light is connected as shown below:
Gray = Plus marker light (12V-24V)
Red = Plus warning light (12V-24V)
Black = Minus / Ground
Yellow = Flash pattern
White = Night setback of the strobe light by wiring to black / minus
Flash-pattern
When you pulse the yellow wire to plus, the lamp changes to the next flash pattern. Three quick pulses set the lamp to flash-pattern 1.
Grouping
When you connect both red and yellow to plus at the same time, the grouping setup is started. The lamp will flash once or twice to show the setup grouping. You can change the group by pulsing the yellow wire to plus. As soon as you turn off the lamp, it will remember the set grouping.
Facts for Yellow strobe, Yellow marker
| Average consumption: | 9W |
| Lifetime: | 100.000 hours |
| Max power: | 18W |
| Voltage: | 12-24V DC |
| Wire: | 30cm |
| Work temperature: | -30°C til +60°C |
Facts for Yellow strobe, White marker
| Average consumption: | 9W |
| Lifetime: | 100.000 hours |
| Max power: | 18W |
| Voltage: | 12-24V DC |
| Wire: | 30cm |
| Work temperature: | -30°C til +60°C |
Facts for Yellow strobe, Red marker
| Average consumption: | 9W |
| Lifetime: | 100.000 hours |
| Max power: | 18W |
| Voltage: | 12-24V DC |
| Wire: | 30cm |
| Work temperature: | -30°C til +60°C |
Facts for Blue strobe, Yellow marker
| Average consumption: | 9W |
| Lifetime: | 100.000 hours |
| Max power: | 18W |
| Voltage: | 12-24V DC |
| Wire: | 30cm |
| Work temperature: | -30°C til +60°C |
Facts for Blue strobe, White marker
| Average consumption: | 9W |
| Lifetime: | 100.000 hours |
| Max power: | 18W |
| Voltage: | 12-24V DC |
| Wire: | 30cm |
| Work temperature: | -30°C til +60°C |
Facts for Blue strobe, Red marker
| Average consumption: | 9W |
| Lifetime: | 100.000 hours |
| Max power: | 18W |
| Voltage: | 12-24V DC |
| Wire: | 30cm |
| Work temperature: | -30°C til +60°C |
Facts for Red strobe, White marker
| Average consumption: | 9W |
| Lifetime: | 100.000 hours |
| Max power: | 18W |
| Voltage: | 12-24V DC |
| Wire: | 30cm |
| Work temperature: | -30°C til +60°C |
LED lamp with "Halo" marker light, and LED warning strobe in the middle with 21 different patterns. ECE approved (R65, R148, R10) in all colors
Vis fuld beskrivelse
