Smart small dimmable motion sensor and light sensor with DC connectors on the input and output, allowing it to connect to our power supplies. If you want to use DC connectors with screw terminals, you need DC connectors with a 5.5*2.1mm inner diameter.
As soon as the sensor detects motion, it will activate the power on the output with the same voltage as the input. 12V in = 12V out.
The sensor has a 110-degree angle and a range of 5-7 meters.
The light sensitivity is not adjustable but activates at 35 lux. With a single press, the light sensor can be disabled, so it reacts to motion regardless of whether it is dark or bright. The time it stays on can be adjusted in increments:
1: 15 seconds
2: 30 seconds
3: 60 seconds
4: 3 minutes
5: 5 minutes
6: 15 minutes
7: 30 minutes
The sensor can also be dimmed in increments:
1: 100%
2: 75%
3: 60%
4: 45%
5: 30%
6: 15%
Dimensions
Length 48mm
Width 25mm (edge to screws is 5.5mm, totaling 31.5mm)
Thickness 14mm
Thickness including dome: 22mm
Facts for White
| DC connector: | 2.1mm inner diameter |
| Max current: | 3A |
| Power consumption: | 50uA |
| Sensor angle: | about 110 degree |
| Sensor distance: | 5-7m or under (adjustable) |
| Voltage: | 5-25V |
Facts for Black
| DC connector: | 2.1mm inner diameter |
| Max current: | 3A |
| Power consumption: | 50uA |
| Sensor angle: | about 110 degree |
| Sensor distance: | 5-7m or under (adjustable) |
| Voltage: | 5-25V |
A smart little motion-sensor and a light sensor with a DC plug. The sensor has 110 degree angle and 5-7 m range. It comes in black and white colors.
Vis fuld beskrivelse
