Simple light timer, that is very easy to connect and adjust. The timer Turns on the output, when activated, eg. with a switch. It turns off after set time, or when you push the button again.
Connecting
The controller is connected to power on IN+ and IN-. Remember correct fuses.
A switch is connected between S- and ground. When this is pressed, the output is activated, O+ and O-, for the set time, where after it is turned off again. A push more on the button, and it is deactivated right away.
As the switch is minus-controlled, you only need one switch from S- to the switch, and the last pin on the switch is connected to ground.
Adjustable delay
The enclosure is opened. Inside is 3 dip-switches for adjusting the time. Standard the delay is 2 minutes. By pushing the dip-switch, you add extra time. The value of the dip-switches is shown on the board.
Facts for 12V
| Max current : | 10A |
| Voltage: | 12V |
Facts for 24V
| Max current : | 10A |
| Voltage: | 24V |
Simple light timer, that is very easy to connect and adjust. Turns on the output for the set time, when activated.
Vis fuld beskrivelse
