LED markerlamp that is available in red, yellow & white glass and light. The lamps can be used for side-marking and position-lights front and back.
The lamp uses SMD LEDs and the lamp itself is only 10.4mm thick.
It can be mounted with screws or bolts through the 4mm holes. The rubber-base that is included ensures that the lamps sits on the mouning surface.
The white model has 6 LEDs, while the yellow and red models have 5 LEDs.
All models are E-approved.
Facts for Yellow
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
Facts for Red
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
Facts for Clear / White
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
Facts for Accessory, Stainless mounting set - M4 20mm
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
Facts for Accessory, Stainless mounting set - M4 30mm
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
Facts for Clear / White, 3.5m cable
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
Facts for Red, 3.5m cable
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
Facts for Yellow, 3.5m cable
| Consumption: | 0.5 mA - 1.2w |
| Voltage: | 12-24V |
| Wirelength: | 20cm |
LED markerlamp made by WAS that is available in red, yellow & white glass and light.
Vis fuld beskrivelse
